Pengcheng
SCBH15 Dry Type Amorphous Alloy Power Transformer:
Structural design: The three-phase three column dry type amorphous alloy power transformer produced by our company inherits the characteristics of pouring dry-type distribution transformers, with a more reasonable structure and more reliable performance.
Low loss: This model Dry Type Amorphous Alloy Power Transformer no-load loss of the product is reduced by more than 40% compared to SCB10 dry-type transformers, with excellent energy-saving effect, economical operation, and maintenance free.
Low noise: The product's noise level is 10-15 decibels lower than the current professional standard JB/T10088-2016 "6-220KV Transformer Sound Level Y.
Low partial discharge: The resin mixture adopts two techniques, namely foreign mixing methods and vacuum film degassing, to stir the mixture evenly and eliminate bubbles inside the mixture. The product has extremely low partial discharge capacity. Both high and low voltage coils are poured under vacuum and pressure, making the resin insulation both fully encapsulated and impregnated between turns. The poured body has a dense solidification structure, which is flame retardant, explosion-proof, and does not pollute the environment.
The insulation materials such as glass fiber used for winding coils have self extinguishing properties and will not generate arcs due to short circuits. Under high heat, the resin will not produce toxic or harmful gases.
High mechanical strength: The resin with filling material reduces the difference in expansion coefficient, curing shrinkage rate, internal stress, and hardness of the cured material inside the pouring body. Prefabricated reinforcement materials are placed in the epoxy resin encapsulation layer on the inner and outer surfaces of the high and low voltage coils, which has a dense structure like reinforced concrete. Therefore, the mechanical strength is greater than that of pure epoxy resin and can withstand sudden short-circuit electric force without damage.
